If you own or operate heavy machinery, you know all about dirt. Working in dirt is your business.
Yet the same dirt that is the lifeblood of your business is also the mortal enemy of your equipment.
You do regular maintenance. You do oil analysis. You change your filters frequently.
And yet your engine is still not making it to the next maintenance cycle. So what is it
about dirt that is still causing your problem?
You need to know that it's not enough just to worry about dirt. In fact, there is
something much more destructive that you need to pay attention to - something you may
be completely unprotected from.
What you don't know about dirt can hurt you!
Micro-Abrasive Dust: Dirtier Than Dirt Itself.
All around us, there are particles in the air that are much smaller than dirt, yet they account
for as much as 85% of engine damage. These particles are less than 20 microns in size, and
are known as
micro-abrasive dust.
Micro-abrasive dust consists of tiny silicone particles that severely damage engines and
drastically shorten the life of filters. Worst of all, these nearly-invisible particles
are everywhere - not just in extreme environments.
It's no wonder that the filter industry is researching solutions to combat micro-abrasive
dust - it's quickly becoming recognized as the single most deadly contaminant to today's precision engines.
Micro-Abrasive Dust Kills Engines
Micro-abrasive dust particles are extremely abrasive. They have razor-like flakes that
grind and gouge surfaces, alter clearances, and generate even more abrasive debris.
They are drawn into your engine through the air intake and destroy critical precision parts.
Micro-abrasive dust wreaks havoc on your equipment, your high- tech filters, and your
livelihood. Its particles drastically degrade engine performance and increase fuel
consumption.
Not even dual-stage filters can stop these devastating particles.
Either Stop Micro-abrasive Dust, Or It Will Stop You
Quite simply, if you're not stopping micro-abrasive dust, you can expect to pay dearly.
In addition to jeopardizing your engine, you're going to waste expensive filters and fuel.
You'll also have higher maintenance costs, more downtime, and a bundle of otherwise avoidable warranty claims.
So what can you do to protect your livelihood?
Micro-Abrasive Dust Meets Its Match
There is only one product on the market that exclusively engineered to eliminate deadly micro-abrasive
dust before it enters the filter - the
turbo® Precleaner. No other precleaner can make this claim.
Regardless of how you are combating dirt today, the turbo® Precleaner is the single most critical
investment you can make to protect your engine and your livelihood.
This is all the more important in the age of today's precision-engineered Tier III and Tier IV engines.
Their tighter tolerances and lower emissions demand ultra-clean air. Only the turbo® Precleaner can
deliver this up-front protection.
How Can We Make This Claim?
Independent tests performed by the Southwest Research Institute and the US Army TARDEC prove that
the
turbo® Precleaner directly targets and eliminates the particles that cause up to
85% of all engine damage.
These particles are between 5 and 20 microns in size and are found in the zone of maximum danger
to critical equipment parts.
When it comes to protecting your engine, there is only one target zone that matters.
Either your engine is protected from micro-abrasive dust, or it's not. Like a seatbelt,
there's no "in between".
Unless you have the turbo® Precleaner, you may as well have no
protection at all.
Why is the turbo® Precleaner is the only Precleaner that can make this claim?
The turbo's ® top-through airflow creates the velocity needed to centrifugally separate
micro-abrasive dust particles. No stop-and-go, bottom-through precleaner can match the
turbo's® raw power
and sheer effectiveness at stopping destructive dust.
In test after test, the turbo® has exceeded all other precleaners in the sheer power and efficiency of its
exclusive top-through airflow design.
If it's not the genuine turbo® , it's just a raincapTM.
There are two kinds of people in this profession - those who use the turbo® Precleaner,
and those who wish they had.
If your precleaner is not the genuine turbo® Precleaner, your very livelihood is vulnerable to the deadliest
contaminants on earth. Upgrading to the turbo® is not only the smartest choice you can
make - it's the only choice.
Is the turbo worth the investment? Try the cost of not having one.
Back To Top